36
Super X13SCL-IF User's Manual
DESIGNED IN USA
X13SCL-IF
REV:1.01
BAR CODE
BIOS LICENSE
JL1
JSMB1
JTPM1
I-SATA4
I-SATA5
BT1
JSLIM2
JSLIM1
C262
JPCIE1
JCPLD1
JD1
LED3
LEDM1
JPI2C1
JMD1_SRW1
JPW2
FANA
FAN3
FAN2
FAN1
JF1
JPW1
JMD1
JBT1
JPME2
JNS1
JRF1
JPL1
JPL2
JWD1
JPG1
JVRM1
MH4
MH3
MH2
MH1
JUIDB1
LED1
LED2
PCIe 4.0 x4
PCIe 4.0 x4 / SATA x4
CMOS CLEAR
2-3: NVMe
1-2: SATAJNS1:
LEDPWR
LEDBMC
USB4/5 (3.2(5Gb))
USB2/3 (3.2(5Gb))
COM1
PCIe 4.0 x4
JMD1:M.2-C
VGA
LAN1/2
JL1: CHASSIS INTRUSION
BMC_LAN
USB0/1
:SMBus1
:PWR I2C
1-4:SPEAKER
1-2:ENABLE
2-3:DISABLE
JPL2:LAN2
2-3:DISABLE
1-2:ENABLE
JPL1:LAN1
ON
PWR
RST
JF1:
NIC2
FF
OH
X
NIC1
LED
PWR
LED
HDD
CPU SLOT7 PCIe 5.0 x16 (IN x16)
DIMMA1
DIMMB1
2-3:ME MANUFACTURING MODE
JWD1:WATCH DOG
1-2:RST
2-3:NMI
1-2:ENABLE
2-3:DISABLE
JPG1:VGA
JPME2:
1-2:NORMAL
CPU
JTPM1:TPM/PORT80
BMC
Controller
1
1. UID Switch
2. UID LED
2
Unit Identier Switch/UID LED Indicator
A Unit Identier (UID) switch and an LED indicator are located on the motherboard. The UID
switch is located at JUIDB1, which is next to the VGA port on the back panel. The UID LED
(LED2) is located next to the UID switch. When you press the switch, the LED will be turned
on, which provides easy identication of a system unit that may be in need of service. Press
the switch again to turn o the LED indicator.
Note: UID can also be triggered via IPMI on the motherboard. For more information on
IPMI, refer to the IPMI User's Guide posted on our website: https://www.supermicro.
com/support/manuals/
Note: After pushing and holding the UID-SW for 12 seconds, all BMC settings includ-
ing username and password will revert back to the factory default. Only the network
settings and FRU are retained.
Function User Input Behavior LED Activity
UID LED Indicator
Push Once Turns on the UID LED UID LED turns solid blue
Push Again Turns o the UID LED UID LED turns o
BMC Reset
Push and hold for 6 seconds BMC will do a cold boot BMC Hearbeat LED turns solid green
Push and hold for 12 seconds BMC will reset to factory default BMC Hearbeat LED turns solid green
To Next Page
Loading...
