Supermicro X13SCL-IF - Page 73

Chapter 4: UEFI BIOS
73
IO MWait Redirection
Use this feature to redirect IO_read instructions sent to IO register PMG_IO_BASE_
ADDRBASE+o󰀨set to MWAIT(o󰀨set). The options are Disabled and Enabled.
Package C-State Limit
Use this feature to set the Package C-State limit. The options are C0/C1, C2, C3, C6, C7,
C7S, C8, C9, C10, Cpu Default, and Auto.
Total Memory Encryption
Use this feature to enable or disable the Total Memory Encryption (TME) function for enhanced
memory data security. TME protects DRAM data from physical attacks. The options are
Disabled and Enabled.
Chipset Conguration
Warning: Setting the wrong values in below sections may cause system to malfunction.
System Agent (SA) Conguration
System Agent (SA) Conguration
The following System Agent information will be displayed:
• VT-d
Memory Conguration
Memory Conguration
The following memory information will be displayed:
• Memory RC Version
• Memory Frequency
• Memory Timings (tCL-tRCD-tRP-tRAS)
• DIMMA1
• DIMMB1
Memory Test on Warm Boot
Use this feature to enable or disable memory test on a warm boot. The options are
Disabled and Enabled.