Supermicro X13SCL-IF - Page 86

Super X13SCL-IF User's Manual
86
PXE boot wait time (Available when "Network Stack" is set to Enabled)
Enter a value for the wait time (in seconds) to press the <ESC> key to abort the PXE boot.
The default is 0.
Media detect count (Available when "Network Stack" is set to Enabled)
Enter a value for the number of times the presence of media will be checked. The default is 1.
MAC: XXXXXXXXXXXX-IPv4 Network Conguration
MAC: XXXXXXXXXXXX-IPv4 Network Conguration
Congured
This feature indicates whether a network address congured successfully or not. The
options are Disabled and Enabled.
*If this feature is set to Enabled, the following features will become available for
conguration:
Enable DHCP
Use this feature to set the DHCP. The options are Disabled and Enabled.
*If this feature is set to Disabled, the following features will become available for
conguration:
Local IP Address - Enter an IP address in dotted-decimal notation.
Local NetMask - Enter a NetMask in dotted-decimal notation.
Local Gateway - Enter a Gateway in dotted-decimal notation.
Local DNS Servers - Enter a DNS Servers in dotted-decimal notation.
Save Changes and Exit
Select this feature to save the changes you've made and return to the upper conguration
page.
MAC: XXXXXXXXXXXX-IPv6 Network Conguration
MAC: XXXXXXXXXXXX-IPv6 Network Conguration
Enter Conguration Menu
Information for the following is displayed:
• Interface Name
• Interface Type
• MAC address
• Host addresses