2-2
B1SA4-2750F/B1SA4-2550F Motherboard User’s Manual
2-2 System Memory
CAUTION
Exercise extreme care when installing or removing
DIMM modules to prevent any possible damage.
How to Install SODIMMs
Each of the four nodes has its own memory bank. Populate Channel A rst, the
Channel B. In this example, Channel A of Node 1 is designated as P1-DIMMA1
and Channel B is P1-DIMMB1. Be sure to populate the sockets with SODIMM
memory with the same speed.
Memory Support
Each node on the B1SA4-2750F/B1SA4-2550F Motherboard supports up to 32GB
of up to 1600MHz of unbuffered Non-ECC DDR3 SODIMMs in 2 SODIMM slots.
Note: Check the Supermicro website for a list of memory modules that
have been validated with the B1SA4-2750F/B1SA4-2550F motherboard.
P1-DIMMA1
P2-DIMMA1
P3-DIMMA1
P4-DIMMA1
P1-DIMMB1
P2-DIMMB1
P3-DIMMB1
P4-DIMMB1
To Next Page
Loading...
Need help?
General
