4-24
X8DTU/X8DTU-F User’s Manual
User Access Level (Available when Supervisor Password is set as above)
Select Full Access to grant the user full access to the Setup utility, and change
Setup settings. Select View Only to allow the user to access the Setup utility to view
the settings without making changes. Select Limited to allow the user to change
selected settings such as Date and Time. Select No Access to prevent the user
from accessing the Setup Utility.
Change User Password
Select this feature and press <Enter> to access the submenu, and enter a new
user password.
Clear User Password (Available only when User Password has been set)
This item allows you to clear a user password after it has been entered.
Password Check
This item allows you to check a password after it has been entered. The options
are Setup and Always.
Boot Sector Virus Protection
If this feature is enabled, the AMI BIOS displays a warning when any program (or
virus) issues a Disk Format command or attempts to write to the boot sector of the
hard disk drive. The options are Enabled and Disabled.
Clear User Password (Available only when User Password has been set)
This item allows you to clear a user password after it has been entered.
Password Check
This item allows you to check a password after it has been entered. The options
are Setup and Always.
Boot Sector Virus Protection
When this feature is set to Enabled, the AMI BIOS displays a warning when any
program (or virus) issues a Disk Format command or attempts to write to the boot
sector of the hard disk drive. The options are Enabled and Disabled.
To Next Page
Loading...
Need help?
General
