18
EN
8. Safety instructions for the installation
i
Poor routing of the belt can cause the belt to fail
and leads to unnecessary loads on the superrollo
GW180 / GW185.
◆ Install the belt winder so that the belt runs as
straight as possible into the device, in order to avoid
unnecessary friction and wear.
◆ Screwdriver (cross recessed head)
◆ Scissors
◆ Carpenter's gauge or measuring tape
◆ Pen
◆ A drilling machine and a 6 mm masonry drill,
if new mounting holes need to be drilled.
8.1 You will require the following tools
Incorrect installation can lead to property damage.
◆ Strong forces are exerted during operation of the
system which require secure installation on a rm
base.
i
To Next Page
Loading...