Superrollo GW180 User Manual

6
EN
i
2.3 Technical Term - Denition
DIN EN 13659
"Shutters and external Venetian blinds -
Performance requirements including safety."
◆ This standard determines the performance require-
ments that externally attached shutters and blinds
must full. It also contains signicant hazards with
regard to the design, transportation, installation,
operation and maintenance of these shutters and
blinds.
Blinds
◆ Roller shutters
Obstacle detection
◆ If the roller shutters hit an obstacle in the DOWN ( t )
direction, the superrollo GW180 / GW185 is switched
o, see page 11.
Overload cut-o
◆ If the drive jams in the UP ( ▲ ) direction (for exam-
ple, due to ice), the superrollo GW180 / GW185 is
switched o, see page 11.
End points
◆ An end point is dened and set for each running
direction of the roller shutter. Once this point has
been reached, the superrollo GW180 / GW185 switch-
es o and the roller shutter stops.
Running Time Limit - Transient Operation (KB)
◆ The roller shutter belt winder superrollo GW180 /
GW185 is not designed for continuous operation.
Transient operation denes the maximum permis-
sible running time, see page 12 /15.

Superrollo GW180 Specifications

General

Brand	Superrollo
Model	GW180
Category	Indoor Furnishing
Language	English