Superrollo GW180 - Erase All Settings, Software Reset

32
EN
17. Erase all settings, software reset
If necessary, you can erase all of your settings and
return the superrollo GW180 / GW185 system to its
original factory settings.
1. Remove the cover plate from the setting buttons.
i
2. + +
SO
WI
Simultaneously press and hold the
buttons for 4 seconds.
3. The indicator light ashes rapidly.
4. Release the buttons, subsequently all of the settings
will be deleted.
◆ End points
◆ Timer periods
5. The indicator light will go o once the button is
released.