Superrollo GW180 - Switching Automatic Timer On;Off

31
EN
Congure a closing time ( t )
(e.g. at 20:30 hours)
1. + Simultaneously briey press the
buttons.
2. The indicator light ashes and the roller
shutter travels downwards. The automatic
timer is now activated.
Your roller shutters will close
automatically every day at 20:30.
16.2 Switching the automatic timer on / o
If required, the automatic timer can be switched on or
o at any time.
1. Press and hold the timer button for
approx. 1 second.
2. Pay attention to the indicator light.
The indicator light ashes briey to conrm that the
timer button has been pressed. The status of the
automatic timer will then be displayed.
ON (10 seconds)
Automatic timer ON
Flashing
After power failure, if at least one
switching time was previously been
congured.
OFF
Automatic timer OFF
The previously congured switching
times are stored.
16.1 Conguring an opening and closing time
i
In the event of power failure, the switching
times will be extended by the duration of
the power failure, and therefore may require
reconguration.