25
EN
12. Mounting the superrollo GW180 / GW185
1. Slide the superrollo GW180 / GW185 onto the wall
bracket from below until it engages.
Otherwise, the superrollo GW180 / GW185 may fall
o again.
WARNING!
A damaged connecting cable may cause a short
circuit.
Ensure that the connecting cable is not pinched or
damaged during the mounting process.
i
2. Re-insert the mains plug into the 230 V / 50 Hz socket.
i
Leave the bottom cover plate of the setting
buttons open until all settings have been
carried out.
To Next Page
Loading...
