Superrollo GW180 - Drawing in and Fastening the Belt

23
EN
11. Drawing in and fastening the belt
1. First, plug in the small appliances plug into the mains
connection of the superrollo GW180 / GW185 and
subsequently the mains plug into the socket.
3. Remove the mains plug again from the socket.
i
2. Press the Up button until the Fastening hook
are easily accessible in the reel compartment.
i
As no end points have been set yet, the drive
will stop as soon as you release the button.
CAUTION!
There is a risk of injury from the reel.
Never reach into the reel compartment when the motor
is running.
Fastening hook
Reel compartment
The small appliances plug in
the mains connection