33
EN
18. Removing the superrollo GW180 / GW185 (e.g. in the event of a move)
1. Remove the cover plate from the setting buttons.
2. + +
WI
Erase all settings.
Simultaneously press and hold the
buttons for 4 seconds.
3. Fully close the roller shutters.
4. Continue to press and hold the down button.
5. In doing so, pull out the belt as far as possible from the
top of the superrollo GW180 / GW185.
6. Remove the mains plug from
the socket and the small
appliances plug from the
superrollo GW180 / GW185.
i
7. Press the assembly locking device on the back part
and remove the superrollo GW180 / GW185 from the
wall bracket by pulling it downwards.
Assembly locking device
To Next Page
Loading...
