34
EN
8. Remove the reel compartment cover and check the
position of the fastening hook.
9. If necessary, move the fastening hook into an easily
accessible position.
9.1 For this, plug the mains cable into the superrollo
GW180 / GW185 and into the socket.
18. Removing the superrollo GW180 / GW185 (e.g. in the event of a move)
i
CAUTION!
There is a risk of injury from the reel.
◆ Never reach into the reel compartment when the
motor is running.
◆ Always remove the mains plug before touching the
reel compartment.
10. Finally, remove the mains plug again from the socket.
11. Release the belt from the fastening hook and pull
it out completely from the front of the superrollo
GW180 / GW185.
12. Finally, unscrew the wall bracket.
To Next Page
Loading...
