Superrollo GW180 - Page 27

27
EN
13. End point adjustment
Set the lower end point
3. + Simultaneously press and hold the
buttons.
The roller shutter travels down.
4. + Release the buttons, as soon as the roller
shutter reaches the desired position for
the lower end point.
The roller shutters stop and the lower
end point is stored.
i
Please ensure that the belt is not excessively
slack when reaching the lower end point.
Changing or correcting the end points
5. Move the roller shutters to the centre position and
congure the respective end point again.
i
After a period of time it may be necessary to
recongure the end points as the belt may
elongate during the process of operation.