SureFlap MICROCHIP CAT FLAP - Things to bear in mind; Key fitting features

10
EN
SureFlap accessories are
required for wall, glass and
metal installation. Visit
surepetcare.com/accessories
Make sure that your cat
flap is facing the right way.
The side with the SureFlap
logo should be inside.
We strongly advise contacting
a glazier for glass fitting and
a builder for wall fitting.
Things to bear in mind
Key fitting features
We recommend
programming your cat(s)
prior to fitting (see page 7).
Make sure you allow
enough time to set up and
fit your cat flap.
Please feel free to watch our
online installation videos at
surepetcare.com/support
External frame
External
screw holes
Tunnel
External
screw
caps
Do not under any circumstances drill
or cut the tunnel of your cat flap
External
frame
dimensions
210 x 210mm
(8 '' x 8 ''
)
Flap
opening
dimensions
142 x 120mm
(5 '' x 4 '')
External
tunnel
dimensions
165 x 171mm
(6 '' x 6 '')
Tunnel
depth
75mm
(2 '')
External
screws