5
How the cat flap works
In standard operating
mode the cat flap is locked
from the outside.
It unlocks when it detects your
authorised cat’s microchip or collar
tag, when its head enters the tunnel.
Once your cat has fully
entered the house, the cat
flap will lock.
Sensors
Detect your cat
‘Add a Pet’ button
Used to programme your
cat’s microchip (see page 7)
Key features
Battery
compartment
Manual lock
Controls the opening of the flap in either direction (see page 21)
Catch
Controls the inward opening of the flap
Tunnel
Indicator light
Indicates when the battery
level is low and when the cat
flap is in 'Add a Pet' mode
(see page 7 & 8)
Bear in mind
It’s important to know which side of
your cat flap is fitted to the inside of
the house and which goes outside.
The front of the cat flap is where
you can see the SureFlap logo and
battery compartment and must
be inside.
Product overview
As the microchip reader is located on the outside of the cat flap, it is selective entry
only and any animal can exit.
Outside the house Inside the house
To Next Page
Loading...
