EasyManua.ls Logo

SurePrint SP91 - Page 32

SurePrint SP91
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SP91 User Manual
On 20 32 Unrecoverable error occurred.
6
Off 00 0 No automatically recoverable error.
Off 40 64
Automatically recoverable error
occurred.
7 On 00 0 Not used. Select off.
Bit 2 While the cover is opening, the printer showed it as the mechanical error.
Bit 6 If the temperature of print head is extremely high, bit 6 will be turn on, until temperature of the
print head effectively comes down or open the cover during printing.
n = 4: Roll paper sensor status
Bit Off/On Hex Decimal Function
0 Off 00 0 Not used. Select off.
1 On 02 2 Not used. Select on.
2 3
Off 00 0
No paper end detected by paper
near-end sensor.
On 0C 12
Paper near-end detected by paper
near-end sensor.
4 On 10 16 Not used. Select on.
5 6
Off 00 0 Paper near-end sensor with paper.
On 60 96
Paper near-end detect printing to the
paper end.
7 Off 00 0 Not used. Select off.
[Reference] DLE
DLE
DLE
DLE ENQ
ENQ
ENQ
ENQ GS
GS
GS
GS a
a
a
a GS
GS
GS
GS r
r
r
r
DLE
DLE
DLE
DLE ENQ
ENQ
ENQ
ENQ n
n
n
n
[Name] Real-time request to printer
[Format] ASCII DLE ENQ n
Hex 10 05 n
Decimal 16 5 n
[Range] 1 n 2
[Description] Responds to a request in real-time from the host computer. N appoint the following
functions
n Function
1
Recovers from a recoverable error and restarts printing from the
line where the error occurred.
2
Recovers from a recoverable error after clearing the receive and
print buffers.
[Pa r ticularize] · This command only effected when the auto cutter error, cover open.
Deal with the data once the printer receive this command.
· Though the printer is offline, full printing buffer or serial interface mode error, always
execute this command.
· In parallel interface mode, this command can not be executed when the printer is
busy. When Memory Switch 1-3 is ON even the printer is offline, the printer do not set
BUSY.
·
DLE
DLE
DLE
DLE ENQ
ENQ
ENQ
ENQ 2
2
2
2 allow that the printer recovers after clearing receiving buffer area and
printing area. When the printer keep the error occurred, it located in effective set ( as