Suunto TRAVERSE ALPHA - Suunto Traverse Alpha Calibrating Compass

compass gives you accurate readings even if the compass is not
horizontally level.
You can show/hide the compass display from the start menu under
DISPLAYS » Compass.
The default compass display includes the following information:
•
middle row: compass heading in degrees
•
bottom row: press [VIEW] to see current time, cardinal direction
or empty (no value)
273°
NW
You can change the compass display information from the options
menu under
General
»
Formats
»
Compass unit
. Select which is the
primary value in the center of the compass display: degrees, Mils or
cardinals.
The compass switches to power saving mode after one minute.
Reactivate it with [START].
3.6.1 Calibrating compass
If you have not used the compass before, you must first calibrate it.
Turn and tilt the watch in multiple directions until the watch beeps,
indicating calibration is complete.
27