Suunto TRAVERSE ALPHA - Deleting a POI

You can create POIs in Movescount by selecting a location on a map
or inserting the coordinates. POIs in your Suunto Traverse Alpha
and in Movescount are always synchronized when you connect the
watch to Movescount.
NOTE: When recording a hunting or fishing activity, long
pressing [VIEW] displays a shortlist of activity-specific POIs. To view
the entire list, select SHOW ALL.
TIP: You can quickly save your current location as a POI by
keeping [VIEW] pressed. This can be done from any display when
not recording an activity.
3.21.3 Deleting a POI
You can delete a POI directly in the watch or through Movescount.
However, when you delete a POI in Movescount and synchronize
your Suunto Traverse Alpha, the POI is deleted from the watch but
only disabled in Movescount.
To delete a POI:
1. Press [START] to enter the start menu.
2.
Scroll to NAVIGATIONwith [START] and press [NEXT].
3.
Scroll to POIs (Points of interest) with [LIGHT] and press [NEXT].
4. Scroll to the POI you wish to delete with [START] or [LIGHT] and
select with [NEXT].
5.
Scroll to Delete with [START] and press [NEXT].
6. Press [START] to confirm.
56