Engine General Information and Diagnosis: 1A-63
Step Action Yes No
1 9) Check the continuity between the G/Y wire and terminal
“20”.
If OK, then check the continuity between the B/Br wire
and terminal “35”.
Special tool
(A): 09900–25008 (Multi circuit tester set)
(B): 09900–25009 (Needle-point probe set)
Tester knob indication
Continuity test ( )
ECM coupler (Harness side)
Is the continuity OK?
Go to Step 3. G/Y wire shorted to
VCC, or B/Br wire open.
(Black)
(Gray)
?
(A)
(B)
“20”
“35”
I837H1110043-01
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
