4A-12 Brake Control System and Diagnosis:
5) Remove the following parts from the master cylinder.
• Piston (10)
• Return spring (11)
• Return spring guide (12)
6) Remove the dust rubber (13) and snap ring (14).
7) Remove the connector (15), O-ring (16) and air
bleeder valve (17).
Assembly
Assemble the master cylinder in the reverse order of
disassembly. Pay attention to the following points:
CAUTION
!
• Wash the master cylinder components with
new brake fluid before reassembly.
• Do not wipe the brake fluid off after
washing the components.
• When washing the components, use the
specified brake fluid. Never use different
types of fluid or cleaning solvents such as
gasoline, kerosine, etc.
• Apply brake fluid to the master cylinder
bore and all of the master cylinder
component to be inserted into the bore.
BF: Brake fluid (DOT 4)
• When install the spring guide, insert the spring guide
end “A” into the hole “B” of the master cylinder.
10
11
12
I947H1410026-01
14
13
I947H1410027-02
15
16
17
I947H1410028-01
I837H1410034-01
“A”
“B”
I947H1410029-01
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
