5-7
S-HAC MODE
Engine control release conditions
When any of the above conditions are met, the active mode is released
and the normal mode is selected.
Mode (Indicator light) Use for
Normal mode (Unlit) –
Mode-A (slow flashing) Hard & dry dirt, or concrete base
Mode-B (fast flashing) Normal dirt
Selected
mode
Engine control release conditions
Mode-A
or
Mode-B
Control released 6 seconds after starting begins.
Control released when throttle is closed after starting begins.
Control released upon shift to 5th gear.
Control released if starting off is not performed within 180 seconds after mode-
A or mode-B is selected.
Released when the S-HAC switch is pressed again and held down until indica-
tor light turn off.
To Next Page
Loading...
