5-6
SELECTION OF S-HAC (SUZUKI HOLESHOT ASSIST CONTROL) MODE
S-HAC is a function that controls engine characteristics when starting a
race using a starting gate 1. One of three different modes can be
selected for engine control.
NOTE:
• S-HAC performs control intended specifically for starts that use a
starting gate. Do not use S-HAC for a start that does not use a
starting gate.
• The “start off” state of the motorcycle is defined as being from the
point that the clutch is engaged.
• Starting off without opening the throttle (throttle opening of 1/8 or
less) or after lowering the engine speed by frequent half-clutching
may make determination of start off impossible. Do not use S-HAC
when running under such conditions.
To Next Page
Loading...
