120 SV650K7/SK7/AK7/SAK7 (’07-MODEL)
• Remove the headlight. (SV650A) (#SV650/SK3 8-37)
• Disconnect the sensor coupler
4 and remove the front wheel
speed sensor. (#Page 142 and 143)
INSPECTION
• Inspect the wheel speed sensor for damage.
• Clean the sensor if any metal particle or foreign material stuck
on it.
• Check that no wheel speed sensor rotor teeth are broken and
that no foreign objects are caught in the wheel speed sensor.
INSTALLATION
Installation is in the reverse order of removal. Pay attention to
the following points:
• Install the wheel speed sensor rotor as the letters “50T” face
outside.
SAMPLE
To Next Page
Loading...
