Suzuki SV650A - Maintenance and Troubleshooting

SV650K7/SK7/AK7/SAK7 (’07-MODEL) 65
ISC VALVE PRE-SET
When removing or replace the ISC valve, set the ISC valve to
the following procedures:
PROCEDURE
1) Turn the ignition switch OFF position.
2) Remove the seat. (#SV650/SK3 7-4)
3) Connect the special tool to the dealer mode coupler and turn
its switch to ON position.
" 09930-82720: Mode select switch
4) Turn the ignition switch to ON position.
5) Turn the ignition switch to OFF position.
6) Then, wait more than 5 seconds.
NOTE:
The ISC valve automatically is set at PRE-SET position.
7) Turn the special tool to OFF position and remove it from the
dealer mode coupler.
SAMPLE