56 SV650K7/SK7/AK7/SAK7 (’07-MODEL)
THROTTLE BODY CLEANING
!
• Clean all passageways with a spray-type carburetor cleaner
and blow dry with compressed air.
%
INSPECTION
Check following items for any damage or clogging.
*O-ring
* Throttle valve
* Secondary throttle valve
* Vacuum hose
* Delivery pipe/hose
* Injector cushion seal
Some carburetor cleaning chemicals, especially dip-
type soaking solutions, are very corrosive and must
be handled carefully. Always follow the chemical man-
ufacturer’s instructions for proper use, handling and
storage.
* Never clean the main bore of throttle body to prevent
come off molybdenum from the throttle valve.
* Do not use wire to clean passageways. Wire can
damage passageways. If the components cannot be
cleaned with a spray cleaner it may be necessary to
use a dip-type cleaning solution and allow them to
soak. Always follow the chemical manufacturer’s
instructions for proper use and cleaning of the throt-
tle body components. Do not apply carburetor clean-
ing chemicals to the rubber and plastic materials.
SAMPLE
To Next Page
Loading...
