SV650K7/SK7/AK7/SAK7 (’07-MODEL) 55
• Remove the TP sensor
7 and STP sensor
8 with the special
tool.
" 09930-11950: Torx wrench
NOTE:
Prior to disassembly, mark each sensor’s original position with a
paint or scribe for accurate reinstallation.
%
%
%
Never remove the STVA
9 and throttle body link
plates
0.
These adjusting screws (
A,
B,
C) are factory-
adjusted at the time of delivery and therefore avoid
removing or turning them unless otherwise neces-
sary.
Never remove the throttle valve
D and secondary
throttle valve
E.
SAMPLE
To Next Page
Loading...
