Suzuki SV650A - Abs Component Removal, Inspection and Installation

SV650K7/SK7/AK7/SAK7 (’07-MODEL) 119
ABS COMPONENT REMOVAL, INSPECTION AND INSTALLATION
FRONT WHEEL SPEED SENSOR/SENSOR ROTOR
REMOVAL
%
• Remove the front wheel speed sensor

1 by removing the
mounting bolt.
• Remove the front wheel assembly. (#SV650/SK3 7-9)
!
• Remove the front wheel speed sensor bracket

2.
• Remove the front wheel speed sensor rotor

3.
%
* The ABS is made up of many precision parts; never
subject it to strong impacts or allow it to become
dirty or dusty.
* Do not hit the sensor rotor when dismounting the
wheel.
* The wheel speed sensor cannot be disassembled.
Make sure that the motorcycle is supported securely.
When replacing the tire, make sure not to damage the
sensor rotor.
SAMPLE