Suzuki SV650A - Wiring Harness, Cable, Hose Routing and Sensor Installation

SV650K7/SK7/AK7/SAK7 (’07-MODEL) 129
WIRING HARNESS, CABLE, HOSE ROUTING AND SENSOR
INSTALLATION
WIRING HARNESS ROUTING (For SV650/S)

1 Throttle cable *3 To fan motor.

2 ISC valve coupler *4 Clamp harness without contact to bracket.

3 Clutch cable *5 Be careful for the lead wire not to be slackened.

4 Rectifier *6
Base for assembling (White tape)
TPS branch wire : Set upward

5 Clamp *7
Set coupler inside triangle area between frame
and fender.
*1
Push down speed sensor coupler to between
frame and wiring harness. (For SV650S)
*8
Set rear turn and licence lamp leads pulled to
upside of rear fender.
*2
Clamp the speed sensor wiring harness.
(For SV650S)
*1
*2
*3
*4
*8
*7
*6
*5
SAMPLE