Suzuki SV650A - Throttle Body Installation

146 SV650K7/SK7/AK7/SAK7 (’07-MODEL)
THROTTLE BODY INSTALLATION

1 PAIR valve hose (F) *7 Matching mark (White)

2 ISC valve hose (R) *8 Match mark to bulge of nipple.

3 ISC valve hose *9 Be careful not touch the throttle body.

4 PAIR valve hose *10 Cut after clamping.
*1 Clamp ends should face back side. *11 To cylinder head cover (F)
*2 Clamp ends should face lower side. *12 To throttle body
*3 To canister purge hose (Only for E-33)
*13
Pass through the ISC valve hose (R) upper side of
PAIR valve hose (F) and left side of PAIR valve hose.
*4 Clamp ends should face left side.
*5 Matching mark (Blue)
*14
Pass through the ISC valve hose upper side of PAIR
valve hose (F) and right side of PAIR valve hose.
*6 Matching mark (Yellow)
*3
*2
*1
*1
*6
*8
*1
*8
*7
*10
*9
*2
*4
*4
*5
25 N
.
m
2.5 kgf
- m
18.0 lb-ft
( )
25˚
4
2
5
3
1-6
FWD
35 – 45˚
35 – 45˚
15 – 25˚
18 N
.
m
1.8 kgf
- m
13.0 lb-ft
( )
Air cleaner side
Engine side
*1
Tighten temporarily in order to 1 to 5.
Tighten in order to 1 to 6 with torque wrench
10 N
.
m (1.0 kgf-m 7.0 lb-ft)
*11
*12
*13
*14
FWD
FWD
SAMPLE