Suzuki SV650A - Page 124

SV650K7/SK7/AK7/SAK7 (’07-MODEL) 123
REAR WHEEL SPEED SENSOR/SENSOR ROTOR
REMOVAL
%
• Remove the rear wheel speed sensor

1 by removing the
mounting bolt.
• Remove the rear wheel assembly. (#SV650/SK3 7-42)
!
• Remove the rear wheel speed sensor rotor

2.
%
• Remove the battery case. (#Page 126)
• Disconnect the sensor coupler

3 and remove the rear wheel
speed sensor. (#Page 144)
* The ABS is made up of many precision parts; never
subject it to strong impacts or allow it to become
dirty or dusty.
* Do not hit the sensor rotor when dismounting the
wheel.
* The wheel speed sensor cannot be disassembled.
Make sure that the motorcycle is supported securely.
When replacing the tire, make sure not to damage the
sensor rotor.
SAMPLE