SV650K7/SK7/AK7/SAK7 (’07-MODEL) 131
WIRE HARNESS ROUTING (For SV650A/SA)
1 Throttle cable
8 Rectifier
2 ISC valve coupler
9 Clamp
3 Clutch cable *1 To fan motor
4 ABS control unit *2 Clamp harness without contact to bracket.
5 Brake pipe (ABS) *3
Base for assembling (White tape)
TPS branch wire : Set upward
6 Wheel speed sensor *4
Set rear turn and licence lamp leads pulled to
upside of rear fender.
7 Wiring harness *5
Set coupler inside triangle area between frame
and fender.
*1
*2
*3
*5
*4
SAMPLE
To Next Page
Loading...
