SV650K7/SK7/AK7/SAK7 (’07-MODEL) 139
REAR BRAKE HOSE ROUTING (For SV650A/SA)
1 Guide *4 White paint
2 Wheel speed sensor lead *5 Clamp sleeve of brake hose to guide.
3 Screw *6 No contact with reservoir tank and seat rail.
4 Washer *7 Clamp sleeve of brake hose.
5 Brake hose *8
After the brake hose union has contacted the stop-
per, tighten the union bolt.
*1
After the brake hose union has con-
tacted the stopper, tighten the union bolt.
*9 White paint should face outside.
*2 Assemble reservoir tank hose as shown. *10 Insert the reservoir hose into union to the root.
*3 Clamp ends should face backward. *11
Set the guide with hole of swingarm before tighten-
ing.
*3
*2
*6
*9
*7
*10
*11
*8
*1
*5
35˚
4
2
˚
Parallel
*4
SAMPLE
To Next Page
Loading...
