Suzuki SV650A - Page 156

SV650K7/SK7/AK7/SAK7 (’07-MODEL) 155
CYLINDER + PISTON + PISTON RING
Unit: mm (in)
ITEM STANDARD LIMIT
Compression pressure
1 500 kPa
(15 kgf/cm
2
, 213 psi)
1 100 kPa
(11 kgf/cm
2
,
156 psi)
Compression pressure
differenc e ----
200 kPa
(2 kgf/cm
2
,
28 psi)
Piston to cylinder clearance 0.055 – 0.065
(0.0022 – 0.0026)
0.120
(0.0047)
Cylinder bore 81.000 – 81.015
(3.1890 – 3.1896)
81.075
(3.1919)
Piston diam. 80.940 – 80.955
(3.1866 – 3.1872)
Measure at 20 mm (0.79 in) from the skirt end.
80.88
(3.184)
Cylinder distortion
----
0.05
(0.002)
Piston ring free end gap
1st
* Approx. 7 (0.28)
* 5.6
(0.22)
2nd Approx. 11 (0.43)
8.8
(0.34)
Piston ring end gap
1st
* 0.20 – 0.30
(0.008 – 0.012)
0.70
(0.028)
2nd
* 0.30 – 0.45
(0.012 – 0.0018)
0.70
(0.028)
Piston ring to groove clearance
1st ----
0.180
(0.0071)
2 nd ----
0.150
(0.0059)
Piston ring groove width
1st
* 0.83 – 0.85
(0.0327 – 0.0335)
----
* 1.30 – 1.32
(0.0512 – 0.0520)
----
2nd
1.01 – 1.03
(0.0398 – 0.0406)
----
Oil
2.01 – 2.03
(0.0791 – 0.0799)
----
Piston ring thickness
1st
* 0.76 – 0.81
(0.0299 – 0.0319)
----
* 1.08 – 1.10
(0.0425 – 0.0433)
----
2nd
0.97 – 0.99
(0.0382 – 0.0390)
----
Piston pin bore 20.002 – 20.008
(0.7875 – 0.7877)
20.030
(0.7886)
Piston pin O.D. 19.992 – 20.000
(0.7871 – 0.7874)
19.980
(0.7866)
SAMPLE