SV650K7/SK7/AK7/SAK7 (’07-MODEL) 43
“C41” (P0230) FP RELAY CIRCUIT MALFUNCTION
On model K7, the connector terminals to be used for checking
sensors for voltage, resistance or continuity at the ECM terminal
are located as shown in the illustration.
* Refer to the SV650/S service manual 4-44 for details.
“C42” (P01650) IG SWITCH CIRCUIT MALFUNCTION
* Refer to the SV650/S service manual 8-47 for details.
ECM coupler (Harness side)
SAMPLE
To Next Page
Loading...
