SV650K7/SK7/AK7/SAK7 (’07-MODEL) 81
BASIC TROUBLESHOOTING DIAGRAM
1. Gather information from the customer. ("Page 82)
2. Perform the pre-diagnosis inspection. ("Page 83)
3. Inspect the ABS indicator light. ("Page 86)
6. Inspect the ABS components. ("Page 119)
4. Output the DTCs stored in the ABS control unit. ("Page 89)
7. Delete the DTCs and check the brake operation. ("Page 91)
5. Perform appropriate troubleshooting procedures according to the DTCs output.
("Page 90)
If troubleshooting procedures cannot be performed, try to determine the cause of the mal-
function according to the information gathered in 1 through 4 and inspect the wiring.
("Page 77 and 78)
SAMPLE
To Next Page
Loading...
