Suzuki SV650A - Page 87

86 SV650K7/SK7/AK7/SAK7 (’07-MODEL)
ABS INDICATOR LIGHT INSPECTION
Step 1
1) Check if the ABS indicator light lights up when turning the
ignition switch to ON.
NOTE:
If the ABS indicator light flashes, there may be a short-circuit
existing in the mode select switch wire.
Does the ABS indicator light up?
The ABS indicator light lights up
Step 2
1) Ride the motorcycle at more than 5 km/h (3.1 mile/h).
Does the ABS indicator light go off?
The ABS indicator light does not light up
Step 3
1) Turn the ignition switch to OFF.
2) Remove the front seat. (#SV650/SK3 7-4)
3) Open the fuse box and inspect the signal fuse

1.
Signal fuse: 10 A
Is the signal fuse OK?
%
YES Go to step 2.
NO Go to step 3.
YES Normal (No DTC exists)
NO
DTC OUTPUT (#Page 89)
If DTC can not be output (the ABS indicator light
does not flash), go to step 6.
YES Go to step 4.
NO Replace the signal fuse.
If a fuse is blown, find the cause of the problem and
correct it before replacing the fuse.
SAMPLE