88 SV650K7/SK7/AK7/SAK7 (’07-MODEL)
Step 7
1) Disconnect the ABS control unit coupler. (#Page 85)
2) Turn the ignition switch to ON with the ABS control unit cou-
pler disconnected, measure the voltage between
H terminal
and
4 terminal at the coupler.
$ Normal value: Battery voltage (12.0 V and more)
" 09900-25008: Multi-circuit tester set
09900-25009: Needle pointed probe set
' Tester knob indication: Voltage (()
Is the voltage between
H and
4 normal?
Step 8
1) Measure the voltage between
B terminal and
4 terminal at
the coupler.
$ Normal value: 7.5 – 9.5 V and more
' Tester knob indication: Voltage (()
Is the voltage between
B and
4 normal?
YES Go to step 8.
NO
Inspect the wire harness. (Faulty ignition wire or
ground wire)
ABS control unit coupler (Harness end)
YES Replace the ABS control unit/HU.
NO
Inspect the wire harness. (Faulty indicator light
wire or ground wire)
ABS control unit coupler (Harness end)
SAMPLE
To Next Page
Loading...
