sWaP Nova - MMS connection configuration

.
11
sWaP Nova user guide
www.s-w-a-p.co.uk
Contents
Reading an MMS message
1 From the clock face, tap Menu.
2 Tap (twice, if necessary).
3 Tap MMS, then tap Inbox. The list of received MMS
messages will be shown, each listed with either the
phone number or the name (if in the Phone book) of its
sender.
The prefixed envelope icon will be shown closed for
unread messages and open for previously viewed ones.
4 Tap the required message to open it.
5 Tap Option to view the range of actions available to
you:
•Reply allows you to compose and send a response to
the original message.
•Reply by SMS allows you to contact the sender via
SMS.
•Reply All allows you to send a response to the sender
and all of the original recipients.
•Forward allows you to send the message to one or
more new recipients without editing.
•Delete and Delete All allow you to keep your Inbox
clear of clutter.
•Properties allows you to view the addressing details,
the subject name and file size of the message.
•Use Details allows you to use the addressing details
of the message.
MMS connection configuration
Before you can use MMS for the first time, you must
ensure that the MMS settings are correct for your
network connection.
1 From the clock face, tap Menu.
2 Tap (twice, if necessary).
3 Tap MMS.
4 Tap Message Settings.
5 Tap Server Profile.
6 Tap the appropriate network provider name and tap
Activate Protocol.
This process is required only once, you are now ready to
use the MMS application.
Voice mail server
This option allows you to configure the phone number
of your network service provider’s voice mail system.
These details are often set automatically by your SIM
card.
1 From the clock face, tap Menu.
2 Tap (twice, if necessary).
3 Tap Voice Mail Server.
4 Tap one of the entries and tap Edit.
5 Tap the upper entry, tap Edit and enter a name for the
network/server.
6 Tap Option and tap Done.
7 Tap the lower entry and enter a valid number for the
voice mail server, as advised by your service provider.
Tap Option and tap Done.
Listening to voice mail messages
1 Tap Voice Mail Server.
2 Tap appropriate server name.
3 Tap Call Voice Mail.
Broadcast message
These are text messages that contain information
relevant to your location, which you can choose to
receive. The messages could contain local weather
forecasts, traffic reports or special offers in local
establishments.
1 From the clock face, tap Menu.
2 Tap (twice, if necessary).
3 Tap Broadcast Message. The menu provides a number
of options:
•Receive Mode enables or disables the broadcast
messages feature.
•Read Message allows you to view any received
broadcast messages.
•Languages allow you to choose to receive all
messages or only those in English.
•Channel Setting allows you to optionally refine which
channels (0 to 999) you wish to receive. As standard,
you will receive messages from all channels.