20
sWaP Nova user guide
www.s-w-a-p.co.uk
Contents
Call Setup
Contains configuration options related to call handling
by your network and by your sWaP Nova.
1 From the clock face, tap Menu.
2 Tap (twice, if necessary).
3 Tap Call Setup.
The menu options will be shown:
•Caller ID determines whether your phone number will
be declared to people that you call. You can choose to
Hide Id, Send Id or leave the decision to be Set By
Network.
•Call Waiting allows you to control whether you should
receive an earpiece alert when a new incoming call is
waiting during an existing call.*
You can Activate, Deactivate or Query Status to
discover the current setting.
•Call Divert determines whether incoming calls should
be diverted* to another number, often to a voicemail
box. You can set call divert actions for any or all of the
following scenarios:
Divert All Voice Calls
Divert If Unreachable
Divert If No Answer
Divert If Busy
Divert All Data Calls
Cancel All Divert
In each case, apart from the last, you can Activate,
Deactivate or Query Status to discover the current
setting. When setting a divert, you will be asked to
enter the number to which calls should be diverted.
This can be a voicemail box or another phone.
* These are network features and are subject to support
from your service provider.
•Call Barring allows you to prevent calls being made or
received, depending on a range of circumstances*.
Outgoing Calls: All Calls; International Calls or
International Calls Except to Home Country.
Incoming Calls: All Calls or When Roaming (on a
network other than your own).
Cancel All
Change Barring PW (password).
In each case, apart from the last two, you can
Activate, Deactivate or Query Status to discover the
current setting.
•Restrictive Call allows you to prevent your sWaP Nova
from making any outgoing calls.
Within this option, you can choose Call / Receive
(for normal operation) or Receive Only (to restrict
operation to receiving incoming calls only).
•Call Time Reminder allows you to invoke an earpiece
reminder beep during outgoing calls in order to remind
yourself about the length of the call. You can choose
a Single beep once a particular call time period has
elapsed or a Periodic beep which repeats each time
an allotted time period elapses. In both cases, after
choosing the reminder type you will be asked to enter
the time period.
•Call Time Display when enabled, will show the length
of the current call on the display.
•Auto Redial when enabled, will automatically try to
redial a called number if connection is lost during the
call.
Network Setup
Contains configuration options related to network
selection and operation.
1 From the clock face, tap Menu.
2 Tap (twice, if necessary).
3 Tap Network Setup.
The menu options will be shown:
•Network Selection gives you tools to find and choose
networks (subject to roaming agreements with your
home network). You can initiate a New Search for
networks, choose the Selection Mode as Automatic
or Manual and, if set to Manual, Select Network to
use.
•Preferred Networks allows you to maintain a list
of networks that you prefer to use and assign each a
weighting, so that your sWaP Nova can make decisions
on your behalf to match network availability at any
time.
•GPRS Connection determines how data calls should
be routed using GPRS. You can choose to Always use
GPRS or use it only When Needed.
To Next Page
Loading...