EasyManua.ls Logo

sWaP Nova - Security Setup; Restore Factory Settings

sWaP Nova
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
.
21
sWaP Nova user guide
www.s-w-a-p.co.uk
Contents
Security Setup
Contains options related to the secure use of your
sWaP Nova.
1 From the clock face, tap Menu.
2 Tap (twice, if necessary).
3 Tap Security Setup.
The menu options will be shown:
•SIM Lock when enabled, causes your SIM card to
request a valid PIN code whenever your sWaP Nova, or
any other phone in which it is installed, is switched on.
You are given only three attempts to unlock the SIM
card and then it permanently locks itself until a PUK
code is entered (available on request from your network
provider).
•Phone Lock when enabled, locks your sWaP Nova
and requests its own PIN code (different to the SIM PIN
code - 1122 as standard) before use. Use the Change
Password option to alter the phone PIN code.
•Auto Keypad Lock allows you to choose a period of
inactivity, after which your sWaP Nova screen will lock.
You can choose from 5 secs,
30 secs, 1 min or 5 mins of inactivity.
Once locked, you need to press the lower button and
then tap your stylus on a displayed target to unlock
your sWaP Nova.
•Fixed Dial allows you to define one or more phone
numbers which may be dialled from your sWaP Nova.
When the Fixed Dial Mode is then enabled, only those
numbers can be dialled. This feature is subject to
support from your service provider.
•Barred Dial allows you to define one or more phone
numbers which you wish to prevent being dialled from
your sWaP Nova. When the Barred Dial Mode is then
enabled, those numbers are barred from being dialled.
This feature is subject to support from your SIM and
service provider.
•Change Password allows you to change three types of
PIN code or password: Your SIM’s main PIN code, your
SIM’s secondary PIN2 code or your sWaP Nova’s own
password code (1122 as standard).
Choose the code that you wish to change, enter
the old code and then enter the new code twice, as
confirmation.
Restore Factory Settings
Allows you to return all options to their factory
conditions and reboot your sWaP Nova.
1 From the clock face, tap Menu.
2 Tap (twice, if necessary).
3 Tap Restore Factory Settings.
4 Enter the sWaP Nova password (1122 as standard) and
tap OK.
5 Tap Yes to confirm.