sWaP Nova - Phone Setup; Time and Date

.
19
sWaP Nova user guide
www.s-w-a-p.co.uk
Contents
User Profiles
These allow you to change the whole nature of your
call-, key-, message- and alarm- alerts in one easy
action.
Note: Flight Mode switches off all communication
aspects of your sWaP Nova to let you use other features
without infringing ‘no mobile’ rules in certain areas.
You can also choose whether to see a Flight Mode
option whenever you first switch on.
1 From the clock face, tap Menu.
2 Tap (twice, if necessary).
3 Tap User Profiles.
A list of all profiles will be shown:
General Headset
Meeting Bluetooth
Outdoor Flight Mode
Indoor
To use a profile
•TapaproleandthentapActivate or OK. Your choice
will be confirmed.
To adjust a profile
1 Tap a profile name and then tap Customize. You can
now adjust the following:
•Tone Setup for all instances:
Incoming calls, alarms, power on and off, incoming
messages and keypad tones.
•Volume for ring tones and key tones.
•Alert Type for mixes of alert tone and/or vibration
alerts.
•Ring type to choose Single, Repeat or Ascending
alerts.
•Extra Tone to allow extra tones for warnings, errors,
etc.
•Answer Mode allows you to enable or disable any
key answering of incoming calls and also choose Auto
answering of incoming calls.
Phone Setup
Contains many configuration options to customise the
operation of your sWaP Nova.
1 From the clock face, tap Menu.
2 Tap (twice, if necessary).
3 Tap Phone Setup.
The menu options will be shown:
•Swipe Function allows you to link any of seven sWaP
Nova functions to a handwriting gesture on the clock
face. Thus, you could make an upward stroke of the
stylus on the clock face to immediately cause your
Phone Book to be shown. There are four swipe gestures
that can be defined.
•Time and Date allows you to set the current time
and date. You can also determine the time and date
formats and define your nearest major city within your
timezone.
•Schedule Power On/Off allows you to maximise your
power efficiency while you’re asleep by choosing times
to automatically switch your sWaP Nova off and on.
•Language lets you choose the appropriate language
for all menus and messages within your sWaP Nova.
•Preferred Input Method determines which on screen
keypad is displayed first when you need to enter
details.
•Display Characteristics contains numerous settings
related to the visual aspects of operation:
Wallpaper allows you to choose the image that is
displayed behind all menus. You can choose a standard
image from the System option or choose one of your
own that is stored within memory using the User
Define option.
Screen Saver allows you to choose an image that
will be displayed during periods of inactivity. You can
choose a standard image from the System option or
choose one of your own that is stored within memory
using the User Define option. You can also disable the
screen saver mode.
Power On Display and Power Off Display allow
you to choose a picture or animation to be shown
when your sWaP Nova is powered on and off. You can
choose a standard image from the System option or
choose one of your own that is stored within memory
using the User Define option.
Show Date and Time determines whether the current
data and time are shown on the clock face page.
Show Operator Name determines whether the
current network name is shown on the clock face page.
Clock Type allows you to choose the clock face design
for the standby screen.
•Speed Dial allows you to define up to eight of your
most regularly used phone numbers and associate them
with dial numbers 1 to 8. Once enabled, when you are
viewing the clock face, tap and hold as you normally
would to enter the dial page, but then tap and hold a
number between 1 and 8 to call the associated phone
number.
•Dialing Vibrator determines whether your sWaP Nova
should provide vibration feedback each time you dial a
digit.
•Disable Sleep Mode determines whether or not your
sWap Nova should enter sleep mode when idle. Setting
this option to On will affect the standby battery timing.
•Auto Update of Date and Time determines whether
the network date and time signal should be used to
update your sWaP Nova settings.
•Handwriting Setting allows you to choose a Pen
Speed and Pen Color for use in handwriting recognition
applications.
•UI Effect Settings allows you to choose the transition
effect shown when you change between different
pages within the menu.
•LCD Backlight allows you to adjust the brightness of
the touch screen backlight.