sWaP Nova - Page 18

.
17
sWaP Nova user guide
www.s-w-a-p.co.uk
Contents
To Do List
•AccesstheOrganizer and then tap To Do List.
When the list opens you will see any existing reminders,
including all programmed reminders from the Calendar
application.
•TapAdd (or Option and then Add, if shown) to create
a new entry, or tap an existing entry to view its details.
Follow the procedure outlined for the Calendar (from
step 3).
•UseDelete Task or Delete All to keep the list free
from clutter.
•TapSend vCalendar to send the currently selected
entry to someone else or save it as a file. You have the
following choices:
•SendBySMS
•SendByMMS
•SendByBluetooth
•SaveasFile
In each case, the relevant application will be invoked.
Alarm
•AccesstheOrganizer and then tap Alarm.
Allows you to quickly set one or more alarms.
To set an alarm
1 In the opening page, tap a vacant alarm entry.
2 Set the alarm to On and then tap the time entry to set
the alarm time.
3 Optionally choose whether you would like the entry
to repeat: Once, Everyday, occur on particular Days,
Weekly or Monthly.
4 Optionally set a Snooze time (after which the alarm will
repeat).
5 If necessary, change the Alert Type using the
combinations of ring and vibration alerts.
6 Tap Done and then tap Yes to confirm.
Your new alarm will be ticked to show that it’s active.
World Clock
•AccesstheOrganizer and then tap World Clock.
The opening page shows a world map with cross hairs
centred on the city that is configured as your location in
the Time and Date settings.
The current time and date for the highlighted location
is shown along with either a moon or sun symbol to
indicate night and day.
•Youcaneitherusetheleftandrightbuttonstochange
to the next city or tap on the map to highlight the
nearest featured city within each timezone.
•TapOption to choose whether the Daylight Saving
Time should be switched on or off.
Calculator
•AccesstheOrganizer and then tap Calculator.
The calculator keypad and readout will be shown.
•Tapyourguresandoperand(s)andtheneithertapthe
= key or press the sWaP Nova lower button to reveal
the answer.
Bluetooth
•AccesstheOrganizer and then tap Bluetooth.
This section contains all tools required to locate, pair
and manage Bluetooth devices for use with your sWaP
Nova.
The opening page lists the main menu of options:
•Power determines whether the Bluetooth circuitry is
switched on.
•Search Bluetooth Device initiates a search for other
Bluetooth devices in the vicinity.
•My Devices shows details for all paired Bluetooth
devices, plus your sWaP Nova.
•Active Device lists all paired Bluetooth devices that are
currently active.
•Settings contains various options:
Visibility determines whether your sWaP Nova can be
seen by other Bluetooth devices that are not yet paired
with it.
Change Device Name allows you to change the
Bluetooth name by which your sWaP Nova is known.
Authentication when set to On,
allows a Bluetooth device to reconnect to your sWaP
Nova (once it has been initially authorized) without
confirmation.
Audio Path allows you to transfer all audio through
the microphone and speaker of a suitable Bluetooth
device.
FTP Setting determines where data to send and be
received should be stored in memory. It also allows
you to control whether the other device can write to
memory as well as read.
•About shows details for your sWaP Nova including
Bluetooth device name, address and supported services.