SectionIV:Maintenance
4.0.MAI.SL-520X
HYDRAULIC OIL SPECIFICATION & INTERCHANGE CHART
Select an ISO grade of Premium Anti-Wear Hydraulic Oil that is optimum for your location.
HYDRAULIC OIL SELECTION CHART
ISO Grade
Ambient Temperature
Ran
e
Viscosity
F° C° SUS @ 100 °F
32 -10 to 85 -23 to 29 150-170
46 10 to 110 -12 to 43 195-240
ISO Grade 46
Company
Name
Brand Name & Grade
Castrol (BP) Paradene 46AW
CITGO A/W 46
Exxon Nuto H 46
Mobil DTE 25 (DTE 15)
Shell Tellus 36
SUNOCO Sun Vis 747 (821 WR)
HYDRAULIC FILTER ELEMENT SPECIFICATION
Mounting Thread: 1 1/4 NPTF
Filtration Rating: 10 micron (Nominal)
Flow Rating: 25 GPM
NOTE:
1. ALWAYS CONSULT YOUR LOCAL HYDRAULIC OIL SUPPLIER FOR MORE INFORMATION.
2. USE CAUTION WHEN OPERATING AT OR BEYOND THE RECOMMENDED TEMPERATURE
EXTREMES.
3. DO NOT OPERATE THE HOOKLIFT HOIST WHEN HYDRAULIC OIL TEMPERATURE ON TANK
GAUGE EXCEEDS 160 °F (71 °C) AS DAMAGE TO HYDRAULIC COMPONENTS CAN OCCUR.
ISO Grade 32
Company
Name
Brand Name & Grade
Castrol (BP) Paradene 32AW
CITGO A/W 32
Exxon Nuto H 32
Mobil DTE 24 (DTE 13)
Shell Tellus 32
SUNOCO Sun Vis 706 (816 WR)
To Next Page
Loading...