EasyManua.ls Logo

Swegon CONDUCTOR W1 - Technical Data RU Room Unit

Swegon CONDUCTOR W1
63 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 : 17
Technical Description
CONDUCTOR RU room unit (thermostat)
Item Data
Designation: CONDUCTOR RU
Storage temperature -40 °C to +80 °C (*)
Operating temperature 0 °C to +50°C
Degree of protection IP 20
Dimensions 86 x 100 x 32 mm
Supply voltage 12 V, 4 size AAA batteries
Actual value, range +10 °C to +32°C
Installation Against a wall or in a 70 mm standard junction
box. Must not be exposed to direct sunlight
In-operation LED, temperature Cooling load
Heating load
In-operation LED, air Low airflow:
One LED lit
Normal airflow:
Two LEDs lit
High airflow:
Three LEDs lit
In-operation LED, enabled Lit LED, AUTO
In-operation LED, disabled Dimmed display, AUTO
Input
Modular contact RJ12 6-pole for connecting up to the controller
(**)
(*) = Specified storage temperature appies to a room unit WITHOUT batteries.
(**) = Used only if wireless communication is not desired.

Related product manuals