GB.SILVERSK.170901
We reserve the right to alter specifi cations.
44
www.swegon.com
7.1.3 SILVER C CX
DECLARATION OF INCORPORATION FOR A
PARTY COMPLETED MACHINE
Original
Directive 2006/42/EC, Annex II 1B
Manufacturer (and whenever applicable its authorized representative):
Company: Swegon AB
Address: Box 300, SE-53523 Kvänum, Sweden
Representative:
Address:
Declares that the partly completed machine:
Type of machine: Air handling unit
Machine No.: SILVER C 35/40, 50/60, 70/80, 100/120 CX and accessories for each respective size that fall
within the scope of these directives
Complies with the applicable parts of 2006/42/EC. The applicable parts of the directive
are defined more precisely in the technical documentation compiled in accordance with
Section B of Annex 7 and, for a justified cause, can be made available in digital form for
any competent authorities. Applicable parts:
Also conform to the following directives:
2004/108/EG, EMC
2009/125/EG, Ecodesign (Commission regulation (EU) No. 327/2011)
2009/125/EG, Ecodesign (Commission regulation (EU) No. 1253/2014)
The following harmonised standards have been observed:
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk mitigation
EN 60204-1:2006 Safety of machinery - Electrical equipment of machines - Part 1: Generic standards
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones from being reached by arms and
legs.
EN 61000-6-2:2005 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial
environments
EN 61000-6-3:2007+A1 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission from equipment in
homes, offices, shops and similar environments
The following other standards and specifications have been applied:
EN 1886:2007 Ventilation for buildings - Air handling units - Mechanical performance
EN 13053:2006+A1:2011 Ventilation for buildings - Air handling units - Rating and performance for units, unit sections
and components
Also declares that:
The machine may not be taken into operation before the complete machines (system) into
which it has been built has been declared to conform to the provisions of Directive
2006/42/EC.
Person authorised to compile the relevant technical documentation:
Name: Dan Örtengren
Address: Box 300, SE-53523 Kvänum, Sweden
Signature:
Place and date: Kvänum / 2017-08-31 Kvänum / 2017-08-31
Signature:
Name: William Lawrance Niklas Tjäder
Position: Product Manager, Kvänum Plant Manager, Kvänum
To Next Page
Loading...
