5.6.0
Repeat
－ This function is to embroider a single or various designs within one frame repeatly at the
same time.
<Fig. 5.6.0-1> appears when is selected in <Fig. 5.6.0-1>.
General Repeat : It can embroider a single design called repeatly up to 99 times horizontally and
vertically.
Special Repeat : It calls various designs saved in the memory and supports up to 64 times of repeat work.
Angle, X-axis reverse, enlargement, reduction and other various editing can be freely
made.
Repeat Load : It calls out the repeat work saved in the memory.
[Fig. 5.6.0-1]
To Next Page
Loading...
