SWF K Series


5.8.0 Machine
- Machine Maintenance has seven sub-menus including machine service, machine information,
machine test, frame origin, error Information, Thread Break Information, and memory initial.
Select and press . Then the sub-menus of machine maintenance appear as in <Fig.
5.8.0-1>.
SELECT
F7
MACHINE
F7
[Fig. 5.8.0-1]
󱅀Machine Service: It conducts the initial setting for jump motor and sequin motor.
󱅀Machine Information: It lists up the SWF machine information.
󱅀Machine Test: It checks normal operation of all solenoids, thread sensors, etc.
󱅀Frame Origin: It finds the frame origin.
󱅀Error Information: It saves and displays the recently occurred errors by up to ten.
󱅀Thread Break Information: It shows thread break information by head.
󱅀Memory Initial: It erases all designs.