SWF K Series User Manual


5.8.2 Machine Information
This function is to show the embroidery machine's mechanical information when initially setting up the
embroidery operating program (For initial setting methods, see “3.2 Machine Setting Change”.)
[Fig. 5.8.2-1]
5.8.3 Machine Test
This function is to test whether the embroidery machine is properly operating by part.
<Fig. 5.8.3-1> will appear when the operation test button is pressed in <Fig. 5.8.0-1>.
[Fig. 5.8.3-1]

SWF K Series Specifications

General

Brand	SWF
Model	K Series
Category	Sewing Machine
Language	English