44--33
4.3
Function Menu Button Screen
There are eight menus related to embroidery work. When each button is pressed, related sub-menu appears.
Depending on whether the machine is in operation, there are two types of menu buttons including ‘Function menus
before embroidery begins’ as in <Fig. 4.3-1> and the ‘Function menus during the pause of embroidery work’ as in
<Fig. 4.3-2>. More details will be dealt with in the section of each button.
[Fig. 4.3-1]
[Fig. 4.3-2]
◆ Frequently Used Buttons on Menu (the number assigned to a key could be different on each screen)
, :
When selecting a menu, they are used to move to the desired menu for selection.
, : If there are more menus which cannot be displayed in one screen, they are used to
move to the previous or next screens.
: It is used to select a menu or execute a command.
:
The command which is going to be executed can be closed.
The window where the command was executed can be closed.
The command can be cancelled.
The move to the prior execution screen is possible.
To Next Page
Loading...
Need help?
General
